EU Short-Term Power Markets: The SIDC, Implicit Capacity Allocation, and Why Compliance Should Care – Part 1
Introduction
European wholesale electricity markets are structurally different from other commodity markets. Rather than operating as isolated national exchanges, they are designed to function as a single, coupled market, where electricity can be traded across national borders depending on the physical constraints of the transmission network. This coupling applies to both day-ahead as well as intraday markets. But to most people, including some seasoned compliance officers, the functioning of these markets, particularly when it comes to capacity allocation, remains somewhat of a black box.
This blog focuses on the Single Intraday Coupling (SIDC) market, a market often colloquially referred to as “XBID” [1]. In addition to discussing the general functioning of the market, we take a closer look at the foundational concept of implicit capacity allocation in this market. Understanding how capacity is allocated in the SIDC market is essential for compliance officers seeking to assess market abuse risk and to design effective surveillance around cross-border trading behaviour which, as we discuss below, has taken on a new importance under REMIT 2.
In the second blog of this series, we will focus on abusive behaviours related to cross-border trading in the SIDC such as implicit capacity hoarding and cross-border wash trades, and what compliance officers need to consider.
EU Coupled Power Markets and the Compliance Challenge
From a policy perspective, market coupling has several objectives including to improve price convergence, to maximise the use of available interconnectors between national markets, and to better handle the integration of intermittent renewable generation. From a compliance perspective, however, coupled markets introduce additional layers of complexity. Orders placed in one bidding zone can affect prices, liquidity, and capacity availability in another. In these markets, capacity is no longer an explicit, standalone product that many are familiar with, but it is now embedded within the power trades themselves.
While under the original REMIT rules, these characteristics mattered, they matter even more under the revised rules. REMIT 2 not only increases the focus on short-term markets [2] by explicitly defining day-ahead and intraday coupling contracts as wholesale energy products, but it also gives ACER new direct investigatory powers over cross-border trades. Behaviours such as implicit capacity hoarding and cross-border wash trades, both closely linked to how coupled markets function, introduce a whole new level of complexity for compliance officers. This adds to an already complicated market where the combination of speed and granularity on their own create surveillance challenges that are materially different from those seen in more traditional markets.
What is the SIDC Market?
The SIDC is the pan-European solution for intraday power trading that enables market participants to trade electricity across multiple bidding zones on a continuous basis. In the SIDC, bidding zones are frequently aligned with national borders, although some countries are divided into multiple bidding zones or share zones across borders.
Trading is facilitated using shared technical infrastructure, rather than separate national markets. Before the SIDC market, intraday cross-border trading was fragmented with capacity allocation methods differing depending on the border. Liquidity was uneven, and access to neighbouring markets was often limited or very manual.
The SIDC market replaced this with a single, harmonised framework where orders from multiple countries are visible in a Shared Order Book (more about this below) and, crucially, where cross-border transmission capacity is allocated automatically where previously such capacity would need to be procured separately.
Who are the main parties involved in the SIDC market?
Before we look at the main components of the SIDC, it is important to understand two parties critical to making the market function.
The first are the Nominated Electricity Market Operators or NEMOs. Most would recognise NEMOs as power exchanges, including venues such as EPEX Spot, Nord Pool and 13 others across the coupled market. NEMOs are the market operators in the SIDC that provide trading interfaces to market participants. They collect and validate orders, submit them into the shared intraday infrastructure (described below) and publish executed trades and prices to participants. Importantly, while market participants interact with individual NEMOs, the matching of orders themselves is centralised. From a market outcome perspective, the identity of the NEMO is largely irrelevant once an order enters the shared system.
The second are the Transmission System Operators or TSOs. While most will know that TSOs are responsible for operating the electricity grid and ensuring grid stability, within the SIDC they do several important things to make the market work. Crucially, they calculate cross-zonal intraday transmission capacity (essentially determining how much electricity can flow between bidding zones based on known and/or anticipated constraints), and they continuously update available capacity as system conditions change. TSOs don’t have any say on which trades occur but they do define the physical limits within which the SIDC market can operate.
How does the SIDC Actually Work?
So how exactly can a market participant in one bidding zone – say NL in Netherlands – see and trade orders placed in a bidding zone in another country – say BE in Belgium?
This is where understanding the shared technical architecture of SIDC is important. The SIDC operates through a unique, shared technical architecture made up of three main components or “modules”. Understanding these modules also helps to explain how implicit capacity allocation works in practice, so below we discuss each of these modules briefly.
The Shared Order Book (SOB)
The Shared Order Book aggregates all eligible intraday buy and sell orders submitted by market participants via participating NEMOs. Orders are collected across all participating bidding zones and critically, orders can only be matched across zones if sufficient capacity is available to move the electricity there. This is obviously highly dynamic and constantly in flux. From both a market and a compliance standpoint, the Shared Order Book is significant because it means that liquidity is no longer just “local”. A single order may interact with counterparties in multiple jurisdictions, and the same order can have different effects depending on evolving capacity constraints.
The Capacity Management Module (CMM)
The Capacity Management Module tracks and manages the amount of cross-zonal transmission capacity that is available for intraday trading. It effectively enables the automatic allocation of capacity – a unique, and fundamentally important feature of the SIDC. The module stores the capacity values provided by the various TSOs for each border and time unit, and automatically deducts capacity when a cross-border trade is executed. It also prevents trades from being executed that would exceed the available capacity. As a side note, the Capacity Management Module doesn’t optimise capacity usage (which is a feature of the day-ahead market) but instead it acts as a real-time “constraint checker” where capacity is allocated “on-the-fly” on a first-come, first-served basis. This is discussed further below.
The Shipping Module
The Shipping Module records the trades executed and communicates them to the TSOs and NEMOs for nomination, settlement, and operational purposes. While this module is perhaps less relevant for compliance from a behavioural analysis perspective, it is still an important part of the end-to-end process that ensures trades translate into physical schedules.
Implicit Capacity Allocation in the Continuous Intraday Market
So how is capacity allocated in the SIDC market? To properly frame this discussion, it’s worth briefly revisiting the “traditional” concept of capacity allocation. For the sake of this discussion, we will ignore intraday auctions (or IDAs), a relatively new feature of the SIDC (although we touch on them briefly later in this blog).
In many commodity markets, access to transportation or related infrastructure is obtained separately from the underlying commodity. Historically, electricity markets have also followed this logic (and some markets still do). That is, capacity was allocated explicitly, and energy trades occurred only after capacity had been secured.
Under this market design, market participants would first obtain transmission rights, usually through a separate auction or booking process, and only subsequently execute energy trades using those rights. Capacity and electricity were therefore legally and commercially distinct products, each with its own pricing dynamics and risk considerations.
The SIDC market however departs from this model.
What Exactly Does “Implicit” Mean?
In the SIDC continuous market, capacity is not traded as a separate product. Instead, orders are submitted to the market without specifying capacity. When a buy and sell order from different bidding zones are matched, the transmission capacity is allocated automatically. The capacity and the power to which it relates are inseparable in the trade execution process. This is what is meant by implicit capacity allocation.
From the participant’s perspective, there is no explicit decision or action needed to acquire capacity. From the system’s perspective however, every cross-border trade consumes a finite transmission resource.
How Does Matching in the SIDC Work in Practice?
The easiest way to explain this is by stepping through a simplified matching process.
It starts when a market participant submits a buy or sell order via a NEMO and the order enters the Shared Order Book. The SIDC continuous trading matching functionality identifies compatible counter-orders based on price and time priority and if the counter-order is in another bidding zone, the system checks the Capacity Management Module. If sufficient cross-zonal capacity exists between the bidding zones, the trade is executed and capacity is deducted immediately from the available amount. This process occurs continuously and sequentially in the continuous market, rather than through a single optimisation run (which is in fact how the day-ahead market auction functions).
One consequence of this approach is that capacity is allocated on a first-come, first-served basis. There is no separate price signal for capacity scarcity in continuous trading beyond the effect it has on which orders can be matched.
A Short Note on Intraday Auctions
For completeness, it is worth noting that the SIDC framework also includes intraday auctions (or IDAs), which were launched in 2024 to complement continuous trading. For IDAs, orders are collected over a fixed period, and a central algorithm is used to clear the market. The algorithm itself is a version of the EUPHEMIA [3] algorithm used in the day-ahead market. While power and the capacity to flow it are allocated simultaneously, the clearing prices of the auction do reflect capacity scarcity (unlike the continuous market which works on a first-come-first-served basis).
Continuous trading in the SIDC however remains the dominant mode of intraday trading activity and the primary context in which implicit capacity allocation occurs.
Surveillance Challenges in the SIDC
So why does the functioning of the SIDC matter for compliance? As mentioned in the introduction, REMIT 2 has raised the stakes for firms trading in this market. With increased regulatory focus on EU short-term power markets, along with ACER’s new direct investigatory powers over cross-border trades, effective monitoring and surveillance are essential.
Since the arrival of REMIT 2, however, compliance officers have been made all too aware of the challenges in monitoring EU short-term power markets. They differ in many ways from traditional futures markets for which most off-the-shelf surveillance tools were designed. Challenges include (but are in no way limited to!) the ability for a system to handle granular traded products, where 15-minute granularity is now the norm, not the exception. Systems are also required to handle the high data volumes driven by this granularity, an issue that is exacerbated by the duplication of data with the Shared Order Book design described earlier. The ephemeral nature of intraday products in the SIDC can also play havoc with traditional surveillance tools that struggle with data historization. We discuss some of these challenges in more detail in this blog.
This surveillance complexity increases to another level when we turn our attention to cross-border trading. Behaviours such as implicit capacity hoarding and cross-border wash trades, by their very nature, are extremely challenging to detect in a systematic way and are well beyond the capability of most competent surveillance tools available in the market.
Conclusion
In this blog, we have described how the unique SIDC market functions and how capacity is allocated, including the potential challenges it presents to compliance officers given ACER’s new direct investigation powers under the revised REMIT regulation. Implicit capacity allocation is not just a technical detail in this market – it is a central feature which sits at the heart of potentially abusive behaviours that ACER is mandated to focus its investigation and enforcement powers towards.
In the second blog of this series, we will examine implicit capacity hoarding and cross-border wash trades in more detail. Both behaviours directly exploit the market mechanics described above. We will examine the analytical layers and capabilities necessary to effectively monitor for these behaviours, along with the many challenges in doing so. ACER has publicly stated [4] that it intends commencing active investigations in the second half of 2026 leaving firms active in cross-border trading with very little time to prepare. If you would like to understand more about the SIDC from a compliance perspective, please do contact us at emea@cubelogic.com.
Footnotes:
[1] XBID is the original technical solution and project name that underpins the continuous trading component of the wider SIDC
[2] Article 2(4)(a)]
[3] EUPHEMIA stands for the EU Pan-European Hybrid Electricity Market Integration Algorithm, is the core algorithm used in the Price Coupling of Regions (PCR) initiative to calculate day-ahead electricity prices and manage cross-border flows across Europe.
[4] Page 62 section 2.4.6. in https://www.acer.europa.eu/sites/default/files/documents/Publications/ACER-Programming-Document-2026-2028.pdf and https://www.acer.europa.eu/news/acer-unveils-its-playbook-investigate-cross-border-remit-energy-market-abuse